2,000+ RAL colors. Textured or smooth. 10-year outdoor life.

Powder coat: durable outdoor finish, wide color range including textured, thicker (50–120 µm) provides excellent impact resistance. Standard for sheet metal enclosures, industrial equipment, outdoor hardware. Wet paint: thinner coatings (25–40 µm), cosmetic perfection possible (no orange peel), required for some Pantone-critical cosmetic work. Anodize (aluminum only): premium cosmetic consumer electronics, integrates into the metal surface (no coating thickness), wear-resistant in Type III hardcoat. Rule of thumb: Anodize for premium aluminum cosmetics, powder coat for durable industrial and outdoor, wet paint for exact Pantone matching.

All 2,000+ standard RAL Classic colors, plus Pantone matching, custom color development. Most common requested: RAL 9005 (jet black), RAL 9010 (pure white), RAL 7035 (light grey for electrical equipment), RAL 5015 (sky blue), RAL 3020 (traffic red), RAL 9016 (traffic white). For textured finishes, popular options include RAL 7016 textured anthracite grey, RAL 9005 textured black.

High-quality powder coating with proper surface preparation (phosphate conversion + primer) lasts 10–20 years in moderate outdoor conditions, 5–10 years in severe UV or coastal environments. Failure modes: UV chalking (color dulls), edge rust-through if substrate prep was inadequate. For maximum outdoor durability: specify polyester or super-durable polyester powder (vs lower-cost epoxy), ensure pretreatment includes chromate or zirconium-based conversion coating, and specify coating thickness of 80–120 µm minimum.

Yes — standard workflow. Welded assemblies require: (1) Grind welds flush if cosmetic finish is desired. (2) Bead-blast or acid-pickle to remove heat-affected zone oxides (powder won't stick to scale). (3) Apply conversion coating. (4) Powder coat and cure. Weld spatter must be removed before coating — otherwise it remains visible under the finish. For cosmetic-critical weldments, filler/body may be applied after welding for weld-line invisibility.

Fine texture (wrinkle/orange peel effect), medium texture (pebbled surface), coarse hammered texture, wrinkle finish (industrial equipment classic look), metallic flake (automotive and consumer electronics), high-gloss smooth, matte smooth (commonly used for modern electronics), semi-gloss. Texture finishes hide minor surface imperfections on the substrate — often specified for sheet metal enclosures where welds and deburred edges would show through a smooth gloss finish.

Small batches (10–50 parts) are accommodated with setup charge ($50–150) but economics favor larger batches. A 500-piece production run has about the same setup overhead as a 10-piece sample batch — so per-unit cost drops significantly with volume. For 1–2 piece prototypes needing powder coat appearance, consider wet spray paint instead; for anything over 50 parts, powder coat becomes very cost-effective.